> ## Content Index
> Fetch the complete content index at: https://olivalabs.com/llms.txt
> Use this file to discover other available public pages before exploring further.

# Raspi-Zero MySensor Gateway
- URL: https://olivalabs.com/raspi-zero-mysensor/
- Published: 2021-01-11T17:04:39.000Z
- Updated: 2026-11-03T03:32:51.000Z
- Author: John Oliva
- Tags: tech, 3d-printing, raspberry-pi, mysensors

*Originally shared via* [*Github*](https://github.com/joliva/rpi%5Fzero%5Fmysensor%5Fgateway?ref=olivalabs.com) *and* [*Thingiverse*](https://www.thingiverse.com/thing:3072244?ref=olivalabs.com) *in 2019.*

**Summary**

Raspberry Pi Zero W based MySensor controller/gateway with Long Range NRF24L01 + PA + LNA RF Transceiver.

\[Archived image unavailable: Image not preserved in the Wayback archive\]

\[Archived image unavailable: Image not preserved in the Wayback archive\]

\[Archived image unavailable: Image not preserved in the Wayback archive\]

\[Archived image unavailable: Image not preserved in the Wayback archive\]

\[Archived image unavailable: Image not preserved in the Wayback archive\]

\[Archived image unavailable: Image not preserved in the Wayback archive\]

\[Archived image unavailable: Image not preserved in the Wayback archive\]

\[Archived image unavailable: Image not preserved in the Wayback archive\]

\[Archived image unavailable: Image not preserved in the Wayback archive\]

**Usage**

Created with OpenSCAD.

1. Print the 3 parts
2. Increase existing rPi Zero mounting holes to 3mm (e.g. drill them carefully)
3. Insert the Pi into the lower piece
4. Attach Long Range NRF24L01 + PA + LNA RF Transceiver to the insert (e.g. super glue)
5. Wire the radio (NRF24L01) to the rPI zero header
6. Press the insert onto the rPI zero
7. Install M3x25 screws through bottom, insert, and finally into the top
8. Configure MySensor gateway according to: [https://www.mysensors.org/build/raspberry](https://www.mysensors.org/build/raspberry?ref=olivalabs.com)
9. Optional: Add controller code to rPI according to: [https://www.mysensors.org/controller](https://www.mysensors.org/controller?ref=olivalabs.com)

**Print Settings**

- Printer: Prusa MK3
- Rafts: No
- Supports: No
- Resolution: 0.2mm
- Infill: 20%

[joliva/rpi\_zero\_mysensor\_gatewayRaspberry Pi Zero gateway/controller housing. Contribute to joliva/rpi\_zero\_mysensor\_gateway development by creating an account on GitHub.![](https://github.githubassets.com/favicons/favicon.svg)jolivaGitHub![](https://avatars2.githubusercontent.com/u/791331?s=400&v=4)](https://github.com/joliva/rpi%5Fzero%5Fmysensor%5Fgateway?ref=olivalabs.com)